FOX 3.0 Factory Coilover Shock (Fox Part: 883-06-182)
If you have a Gen 3 Raptor and want to push it hard in the dirt without immediately bottoming out the front end, swapping your stock setup for this FOX 3.0 Factory Coilover Shock system is the right move. This kit (Part number: 883-06-182) gives you a matched pair of Fox 2021.5+ Ford Raptor Race Series 3.2 Live Valve Internal Bypass Coil-Overs. They plug right into your truck's factory electronics. This means you get to keep all your dashboard drive mode features while getting a massive jump in damping control.The stock shocks on the newer Raptors work okay for casual driving, but they heat up and fade fast when you hit repetitive bumps at high speeds. The FOX 3.0 Factory Coilover Shock assembly uses a much larger 3.2-inch aluminum body that holds a lot more oil fluid. Combined with Fox's internal bypass setup, these shocks give you a plush ride on normal streets but instantly stiffen up near the end of the stroke to stop your truck from violently slamming down over hard jumps.
Features and Benefits
Plugs Into Factory Live Valve: The FOX 3.0 Factory Coilover Shock kit connects straight into your truck’s stock computer harness. It automatically adjusts your valving on the fly based on how fast you are going and what terrain mode you pick.
Big 3.2-Inch Aluminum Bodies: The wider body diameter holds significantly more oil than stock parts. This keeps operating temperatures low so your suspension doesn't get soft and mushy during long runs.
Internal Bypass Valving: Fluid bypasses the main piston through specific slots during normal driving for a smooth street ride, but forces the fluid through the main stack at the bottom of the zone to prevent harsh bottoming.
Threaded Adjustability: These coil-overs have an adjustable threaded spring seat. This lets you dial in your front-end ride height and spring preload exactly where you want it to level out the stance.
Race-Grade Springs: Comes out of the box with heavy-duty Eibach racing springs and spherical bearings that replace soft factory rubber bushings for tighter steering response.
Vehicle Fitment
Make sure your truck fits these exact specs before buying:
Requirement: Must have the factory Live Valve electronic suspension.
Placement: Sold as a pair for the front suspension only.
FAQ
Will the FOX 3.0 Factory Coilover Shock setup throw a code on my dash?
No, it won't. This kit uses an exact plug-and-play electronic connector that hooks right into your stock Live Valve system. Your terrain modes and automatic dampening adjustments will all work fine just like stock.
How much lift can I get out of these front shocks?
The threaded body on the FOX 3.0 Factory Coilover Shock (Fox Part: 883-06-182) allows you to adjust your front ride height, usually giving you up to 2 inches of lift depending on how much preload you crank into the springs.
Can these shocks be rebuilt later on?
Yes, absolutely. The entire Race Series line from Fox is fully serviceable. You can have an off-road shop rebuild the seals, change the oil, or re-valve them down the line instead of buying a whole new set.
Reviews
There are no reviews yet.
Be the first to review “FOX Factory Race Series 3.2 Live Valve Internal Bypass Coilover Pair — 2021.5-2025 Ford Raptor | 883-06-182 | FOX883-06-18219” Cancel reply
Reviews
There are no reviews yet.