Alcon C8 Corvette OEM Front Brake Kit 380x36mm Anodized

Name: Alcon C8 Corvette OEM Front Brake Kit 380x36mm Anodized - Wyld Performance
SKU: alcBRK.200526
Price: 5100.00 USD
Availability: InStock

SKU: alcBRK.200526

$5,100.00

In stock

1 in stock

Add to wishlistAdd to compare

Category: Big Brake Kits

Alcon Corvette C8 Front Street Kit (380x36mm)

Track days and heavy street driving put massive thermal loads on the factory Corvette C8 braking system, leading to pedal fade and soft engagement. The Alcon 6-Piston 380x36mm Front Street Kit is engineered directly to solve this by bringing race-tier thermal management into a package that bolts right up without messing with your factory layout. The massive benefit of this specific package is its low-profile caliper architecture, allowing you to drop a massive 6-piston setup directly behind your stock OEM wheels without running spacers or rubbing the barrels.Whether you are hitting consecutive hot laps at the track or looking for repeatable, hard stopping power on the street, this anodized front kit delivers immediate pedal response and huge heat dissipation.

Key Features & Track Benefits

No-Spacer OEM Wheel Clearance: Caliper profiles are specifically shaped to tuck neatly behind factory Chevrolet Corvette C8 wheels. You get a massive brake upgrade without being forced to buy aftermarket wheels or sketchy wheel spacers.
Monoblock 6-Piston Calipers: Machined from high-strength aluminum alloy and finished in a durable anodized coating. The 6-piston configuration distributes clamping force completely evenly across the pad face, eliminating uneven pad wear and maximizing initial bite.
380x36mm Oversized Rotors: The massive 380mm diameter combined with a thick 36mm profile massively increases total thermal capacity. This design pulls destructive heat away from the friction surface, keeping your brake pedal firm and predictable during back-to-back heavy braking zones.
Advanced Slot Geometry: The rotor faces feature specialized slotting that continuously cleans the pad surface, expels gas buildup under hard braking, and provides water evacuation in wet track conditions.
Hard Anodized Protection: Unlike painted or powder-coated calipers that discolor and peel under track-level temperatures, the hard-anodized finish stands up to extreme heat cycling without degrading.

Technical Specification & Part Number

Ensure your order matches this exact manufacturer part number for the verified C8 front configuration:

Part Number: BRK.200526
Kit Description: Alcon Chevrolet Corvette C8 (OEM Wheels) 6 Piston 380x36mm Front Street Kit - Anodized

Vehicle Fitment Guide

This front brake kit is engineered as a direct-bolt upgrade for the following platform layout:

Chassis: Chevrolet Corvette C8 (Mid-Engine Platform)
Placement on Vehicle: Front Axle Only
Wheel Compatibility: Confirmed to fit directly with factory Chevrolet OEM C8 wheels.

Installation Note: This is a complete front axle upgrade package. It replaces the stock front calipers, rotors, lines, and pads. It does not alter your factory rear brake setup or parking brake functionality.

Frequently Asked Questions

Do I need to run wheel spacers to clear my factory C8 wheels with this kit?

No. Alcon specifically engineered this caliper body profile and offset to clear the factory stock Corvette C8 wheels completely. You do not need wheel spacers, and you do not need to buy aftermarket wheels to clear these 6-piston calipers.

What exactly comes inside this front brake kit box?

This package arrives complete for the front axle. It contains two Alcon 6-piston hard-anodized aluminum calipers, two high-performance 380x36mm slotted rotors, a full set of street/track performance brake pads pre-matched to the rotors, heavy-duty stainless steel braided brake lines, and all the specific mounting brackets and high-tensile hardware required for a clean bolt-on installation.

Will this kit alter the factory brake bias or set off dashboard ABS lights?

No. The total piston surface area inside the Alcon 6-piston caliper is meticulously matched to work in harmony with the factory C8 master cylinder fluid output. It retains proper front-to-rear brake bias, maintains factory pedal travel feel, and will not trigger any ABS, stability control, or dashboard fault codes.

Reviews

There are no reviews yet.

Be the first to review “Alcon C8 Corvette OEM Front Brake Kit 380x36mm Anodized”

Alcon C8 Corvette OEM Front Brake Kit 380x36mm Anodized