KFI Assault Series Winch 2500 lbs. – Metal Cable

KFI Assault Series Winch 2500 lbs. - Metal Cable

KFI Assault Series Winch 2500 lbs. - Metal Cable

Part #: KFIAM-25Not every machine needs a full 3,500 lb rated winch, and if yours doesn't, the 2,500 lb version of the KFI Assault Series saves some weight and cost while still giving you the same reliable build. Dynamic and mechanical braking system for controlled operation, water-resistant seals to keep dirt and moisture out, and a heavy-duty all-metal turn clutch that's built to take repeated use without wearing out.

What you get with this one:

Dynamic and mechanical braking system for reliable holding power. Water-resistant seals protecting the motor and internals from the elements. Standard 4-hole mounting pattern, fits most existing setups without a special bracket. Heavy-duty all-metal turn clutch built to last. Steel cable for solid abrasion resistance in rough terrain.The specs:

• Motor: 12-Volt DC, 1.07hp permanent magnet
• Gear Ratio: 180:1
• Winch Dimensions: 13.5 in. L x 4.44 in. D x 4.76 in. H
• Mounting Bolt Pattern: 3.00 in. x 4.875 in. (4-hole)
• Cable Type: Steel, 3/16 in. dia. x 45.9 ft. length
• Winch Weight: 25.1 lbs.
• Rated Line Pull: 2,500 lbs.

Why grab this one

If your machine doesn't need the extra pulling power of the 3,500 lb version, this one's a bit lighter and typically more budget-friendly while still giving you the same braking system, sealing, and build quality. A solid pick for lighter ATVs or riders who aren't doing heavy-duty recovery work regularly.

Before you install

Check your mount matches the 4-hole, 3.00 in. x 4.875 in. bolt pattern before ordering. And more importantly, make sure 2,500 lbs of rated pull actually covers what you need, if you're regularly pulling heavier loads or vehicles, the 3,500 lb version might be the better fit.

Also worth mentioning

Steel cable holds up well against rocks and brush but needs occasional lubrication and a check for fraying or kinks. Stay within the 2,500 lb rated pull, that number's already got a safety margin built in, so don't push past it.

Questions people usually ask

Will this fit my ATV? It uses a standard 4-hole mounting pattern (3.00 in. x 4.875 in.), which fits most ATV winch mounts, but confirm against your machine's setup before ordering.

Should I get the 2,500 lb or 3,500 lb version? Depends on your machine's weight and what you're typically pulling. Lighter ATVs or occasional use, 2,500 lbs is usually plenty. Heavier machines or regular recovery work, the 3,500 lb version gives more margin.

Steel cable, how does it hold up? Solid abrasion resistance against rocks and brush, just needs periodic lubrication and inspection for wear.

What's the gear ratio? 180:1, same as the higher-capacity Assault Series winches.

Is it sealed against water and mud? Yes, it's built with water-resistant seals protecting the internals.