Spectre HPR Conical Air Filter 6in. Flange ID / 7.719in. Base OD / 5.219in. Top OD / 6.219in. H

Spectre HPR Conical Air Filter 6in. Flange ID / 7.719in. Base OD / 5.219in. Top OD / 6.219in. H

Name: Spectre HPR Conical Air Filter 6in. Flange ID / 7.719in. Base OD / 5.219in. Top OD / 6.219in. H - Wyld Performance
SKU: speHPR9886
Price: 50.99 USD
Availability: InStock

SKU: speHPR9886

$50.99

In stock

236 in stock

Add to wishlistAdd to compare

Category: Air Filters - Universal Fit

Spectre HPR Conical Air Filter 6in. Flange ID / 7.719in. Base OD / 5.219in. Top OD / 6.219in. H (Part #HPR9886)

Building A Custom Intake? Start Here.

You are putting together a custom intake setup. Maybe a project car. Maybe a swapped engine. Maybe just getting rid of that restrictive factory air box. You need a filter that fits your pipe and flows enough air.This is the Spectre HPR Conical Air Filter. Part #HPR9886.It is a universal clamp-on filter. You slide it onto your intake pipe. Tighten the clamp. Done. No custom fabrication. No special tools.

What Do The Numbers Mean?

Let me break it down so you know exactly what you are getting.

Flange ID: 6 inches – The hole where the filter clamps onto your intake pipe. Your pipe needs to be 6 inches around.
Base OD: 7.719 inches – The wide part at the bottom of the filter.
Top OD: 5.219 inches – The narrow part at the top. Tapered shape.
Height: 6.219 inches – How tall the filter is from base to top.

Measure your intake pipe before buying. If your pipe is not 6 inches in diameter, this filter will not fit.

Why Spectre HPR?

HPR stands for High Performance Racing. These are not cheap paper filters that fall apart. They use washable synthetic media. The same stuff as expensive brand name filters. Pre-oiled from the factory. Ready to go out of the box.

Features & Benefits

6 inch flange ID: Fits 6 inch intake pipes.
Tapered cone shape: Flows more air than straight cylinder filters.
Washable synthetic media: Clean it. Re-oil it. Reuse it. Lasts for years.
Factory pre-oiled: Open the box. Clamp it on. Drive it.
Triple chrome plated top: Looks good. Does not rust.
Steel mesh inner liner: Will not collapse under high vacuum.
Urethane flange: Seals tight. No air leaks.

Vehicle Fitment

Universal fit. This filter fits any vehicle with a 6 inch intake tube.

Custom intake setups
Engine swaps
Turbo builds
Carbureted engines with custom air cleaners
Project cars and race cars

Does not come with a specific vehicle fitment. Measure your pipe. If it is 6 inches, it fits. If it is not, it does not.

What Is In The Box?

One Spectre HPR conical air filter. Pre-oiled. Ready to install.

FAQ

How do I know if this fits my pipe?

Measure the outside diameter of your intake pipe. If it is 6 inches, this fits. Use a tape measure or calipers. Do not guess.

Is this filter washable and reusable?

Yes. Clean it with Spectre filter cleaner. Let it dry. Re-oil it with Spectre filter oil. Do not use soap. Do not use compressed air.

How often do I need to clean it?

Every 20,000 to 30,000 miles for street use. More often if you drive on dirt roads or in dusty conditions. Hold it up to a light. If you cannot see light through it, clean it.

Is this CARB legal?

A: No. This product is not CARB legal and not for sale in California. Off-road or track use only if you live in CA.

Will this filter add horsepower?

It will flow more air than a dirty paper filter. On a stock engine, do not expect big gains. On a modified engine with a tune, it helps. The filter is one part of the whole intake system.

Reviews

There are no reviews yet.

Be the first to review “Spectre HPR Conical Air Filter 6in. Flange ID / 7.719in. Base OD / 5.219in. Top OD / 6.219in. H”