Yamaha R6 Fender Eliminator Kit - Black, 2017-2020

New Rage Cycles R6-FE Fender Eliminator Kit — 2017-2023 Yamaha YZF-R6 | LED | Plug & Play | NEWR6-FE

Name: Yamaha R6 Fender Eliminator Kit - Plug & Play, Order Now!
SKU: newR6-FE
Price: 150.00 USD
Availability: InStock

SKU: newR6-FE

$150.00

In stock

5 in stock

Add to wishlistAdd to compare

Remove the bulky stock fender and give your R6 the clean, and more aggressive look it deserves — takes about 30 minutes.

Clean the back of your bike with an NRC designed fender eliminator kit. You will spend less time tinkering and more time riding with this plug-and-play kit featuring the brightest 1mm LEDs offered.

The kit comes with LED turn signals, new license plate bracket, and a LED license plate light for a full LED replacement, all necessary hardware to install and OEM connectors are included to make for a simple bolt-on, plug-in fender eliminator.

New Rage Cycles 17+ Yamaha R6 Fender Eliminator Kit

Part #: NEWR6-FEStock tail sections on the R6 are bulky, and that factory license plate bracket does nothing for the bike's lines. This Yamaha R6 Fender Eliminator Kit from New Rage Cycles cleans that up completely, ditching the oversized stock hardware for a compact black setup that tightens up the rear end and gives the bike a much sharper look.What you get with this one:Fully plug and play, no splicing into your bike's wiring harness required. Black textured finish that blends cleanly with most stock and aftermarket bodywork. Proper flash rate built in, so you're not stuck adding a separate load resistor or flasher relay module just to stop a hyper-blink error. Brightest LED turn signals available in this category, giving you better visibility without an aftermarket lighting company's usual compromise on brightness.The specs:

Fitment: 2017-2020 Yamaha YZF-R6, Base, 599cc
Color: Black, textured finish
Installation: Plug and play
Turn Signal Flash Rate: Compatible with stock ECU, no resistors needed

Why grab this fender eliminator kit

A fender eliminator kit is one of the easiest visual upgrades you can do on an R6, and this one skips the usual headaches that come with cheaper kits, no flasher relay to source separately, no aftermarket turn signals dim enough that you're second-guessing whether other drivers can actually see them. It's a clean, direct swap that just works.

Before you install

Confirm your R6 falls in the 2017-2020 model range covered by this kit. New Rage Cycles built this specifically for that generation's tail section and wiring layout, so earlier or later R6 model years may need a different fender eliminator kit.

Also worth mentioning

Since it's plug and play, install typically takes under an hour with basic hand tools, no soldering or wire splicing required. If your bike's already running aftermarket turn signals or a different tail light setup, double check compatibility before removing your stock hardware.

Questions people usually ask

Is this really plug and play, or do I need extra wiring work?Fully plug and play. It connects using your bike's existing wiring, no splicing or soldering needed.Will I need a resistor or flasher relay for the turn signals?No. The kit's built with the correct flash rate to work with your stock ECU, so no additional modules are required.What years does this Yamaha R6 Fender Eliminator Kit fit?2017-2020 Yamaha YZF-R6, Base trim, 599cc.What color is it?Black with a textured finish.How bright are the turn signals?New Rage Cycles markets these as the brightest LED turn signals in the category, a real step up from many aftermarket kits' dimmer output.

precision-cut aluminum construction with plug-and-play wiring and bright LED turn signals for maximum visibility
Direct bolt-on — zero cutting or splicing required
Made in the USA
Fits 2017–2023 Yamaha YZF-R6

Reviews

There are no reviews yet.

Be the first to review “New Rage Cycles R6-FE Fender Eliminator Kit — 2017-2023 Yamaha YZF-R6 | LED | Plug & Play | NEWR6-FE”

New Rage Cycles R6-FE Fender Eliminator Kit — 2017-2023 Yamaha YZF-R6 | LED | Plug & Play | NEWR6-FE

Remove the bulky stock fender and give your R6 the clean, and more aggressive look it deserves — takes about 30 minutes.